DIRECTIONS FOR USE: Cut across the top of the foil pouch to expose pad. 1. Using the foil to hold the pad, slide the pad into the slot of the vapour plug. When replacing a used pad, inserting a fresh pad will push out the old one. Dispose of used pads safely without touching them directly. 2. Connect to power supply with the nightlight at the bottom. When using the vapour plug with a pad inserted, do not leave the unit in the plug socket for more than 16 hours at a time. Replace the pad before next use. To insert a new pad, allow the unit to cool for 10 minutes. Open a refill pad as described above. Inserting a new pad will push out the old one. Be careful whilst removing and inserting the new pads as the device contains hot surfaces. Remove and discard the old pad to use the nightlight alone. Unplug the vapour plug when not in use. Use only Calpol Vapour Plug and Nightlight refill pads with the Calpol Vapour Plug and Nightlight. The use of other substances may give rise to a toxic or fire risk. If you have asthma consult your doctor before using.